* The List of All Active Datasets in this ERDDAP *

This dataset is a table which has a row of information for each dataset currently active in this ERDDAP.

cdm_data_type = Other
VARIABLES:
datasetID (Dataset ID)
accessible
institution
dataStructure (Data Structure)
cdm_data_type (Common Data Model Type)
class (ERDDAP Class)
title
minLongitude (Minimum Longitude, degrees_east)
maxLongitude (Maximum Longitude, degrees_east)
longitudeSpacing (Average Grid Longitude Spacing, degrees_east)
minLatitude (Minimum Latitude, degrees_north)
maxLatitude (Maximum Latitude, degrees_north)
latitudeSpacing (Average Grid Latitude Spacing, degrees_north)
minAltitude (Minimum Altitude (or negative Depth), m)
maxAltitude (Maximum Altitude (or negative Depth), m)
minTime (Minimum Time, seconds since 1970-01-01T00:00:00Z)
maxTime (Maximum Time, seconds since 1970-01-01T00:00:00Z)
timeSpacing (Average Grid Time Spacing, seconds)
griddap (Base URL of OPeNDAP Grid Service)
subset (URL of Subset Web Page)
tabledap (Base URL of OPeNDAP Table/Sequence Service)
MakeAGraph (URL of Make-A-Graph Web Page)
sos (Base URL of SOS Service)
wcs (Base URL of WCS Service)
wms (Base URL of WMS Service)
files (Base URL of "files" Service)
... (10 more variables)


SAMOS Air-Sea Fluxes (version 3.00) - C36

SAMOS Air-Sea Fluxes - C36. These data are all of the input variables and the relevant output variables of bulk flux calculations done on ship observations using the COARE 3.6 flux algorithm. When redundant instruments exist, the sensors used for calculations are chosen based on the amount of good data available, determined on a per day basis, using an updated method of the one described in Smith, S. R., N. Lopez, and M. A. Bourassa, 2016: SAMOS air-sea fluxes: 2005-2014. Geoscience Data Journal, 3, 9-19, https://doi.org/10.1002/gdj3.34.

cdm_data_type = Point
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
platform_call_sign
platform_name
cruise_name
latitude (degrees_north)
longitude (degrees_east)
in_T (air temperature, degree_C)
in_T_height (air temperature sensor height, meter)
in_RH (relative humidity, percent)
in_RH_height (relative humidity sensor height, meter)
in_TS (sea temperature, degree_C)
in_TS_depth (sea temperature sensor depth, m)
in_SPD (earth relative wind speed, meter second-1)
in_SPD_height (wind speed sensor height, meter)
in_DIR (earth relative wind direction, degrees)
in_P (atmospheric pressure, millibar)
in_SSPS (sea_water_absolute_salinity)
in_RAD_SW
in_RAD_LW
in_RRATE
shf (sensible heat flux, watts meter-2)
lhf (latent heat flux, watts meter-2)
... (78 more variables)


SAMOS Air-Sea Fluxes (version 3.00) - S88

SAMOS Air-Sea Fluxes - S88. These data are all of the input variables and the relevant output variables of bulk flux calculations done on ship observations using the 1988 version of the Smith flux algorithm. When redundant instruments exist, the sensors used for calculations are chosen based on the amount of good data available, determined on a per day basis, using an updated method of the one described in Smith, S. R., N. Lopez, and M. A. Bourassa, 2016: SAMOS air-sea fluxes: 2005-2014. Geoscience Data Journal, 3, 9-19, https://doi.org/10.1002/gdj3.34.

cdm_data_type = Point
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
platform_call_sign
platform_name
cruise_name
latitude (degrees_north)
longitude (degrees_east)
in_T (air temperature, degree_C)
in_T_height (air temperature sensor height, meter)
in_RH (relative humidity, percent)
in_RH_height (relative humidity sensor height, meter)
in_TS (sea temperature, degree_C)
in_TS_depth (sea temperature sensor depth, m)
in_SPD (earth relative wind speed, meter second-1)
in_SPD_height (wind speed sensor height, meter)
in_DIR (earth relative wind direction, degrees)
in_P (atmospheric pressure, millibar)
in_SSPS (sea_water_absolute_salinity)
shf (sensible heat flux, watts meter-2)
lhf (latent heat flux, watts meter-2)
tau (stress magnitude, newton meter-2)
tau_u (zonal stress, newton meter-2)
tau_v (meridional stress, newton meter-2)
... (60 more variables)


SAMOS Air-Sea Fluxes (version 3.01) - B23

SAMOS Air-Sea Fluxes - B23. These data are all of the input variables and the relevant output variables of bulk flux calculations done on ship observations using the 2023 version of the Bourassa flux algorithm. When redundant instruments exist, the sensors used for calculations are chosen based on the amount of good data available, determined on a per day basis, using an updated method of the one described in Smith, S. R., N. Lopez, and M. A. Bourassa, 2016: SAMOS air-sea fluxes: 2005-2014. Geoscience Data Journal, 3, 9-19, https://doi.org/10.1002/gdj3.34.

cdm_data_type = Point
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
platform_call_sign
platform_name
cruise_name
latitude (degrees_north)
longitude (degrees_east)
in_T (air temperature, degree_C)
in_T_height (air temperature sensor height, meter)
in_RH (relative humidity, percent)
in_RH_height (relative humidity sensor height, meter)
in_TS (sea temperature, degree_C)
in_TS_depth (sea temperature sensor depth, m)
in_SPD (earth relative wind speed, meter second-1)
in_SPD_height (wind speed sensor height, meter)
in_DIR (earth relative wind direction, degrees)
in_P (atmospheric pressure, millibar)
in_SSPS (salinity, g kg-1)
shf (sensible heat flux, watts meter-2)
lhf (latent heat flux, watts meter-2)
tau (stress magnitude, newton meter-2)
tau_u (zonal stress, newton meter-2)
tau_v (meridional stress, newton meter-2)
... (60 more variables)